LYCOMING Pushrod Tube Gaskets for R-680 SERIES (Set of 18 gaskets ) RG-690-D-18


Click here to purchase or contact the seller of this item on eBay

Current Price: 72.00 USD

PUSHROD TUBE GASKETS - SILICONE

for  

Lycoming R-680 SERIES

SET of 18 GASKETS


   -   Our silicone rubber gaskets are made from aerospace mechanical

        grade AMS  silicone and designed to withstand temperatures up to

        400 degrees Fahrenheit.   

   -    Therefore, they will not break down and deform or crack up like

         cork or neoprene.   

   -    Our gaskets seal uneven and warped surfaces and 

         eliminate corrosion.

   -    Gaskets are 100% reusable.



Fits:         Lycoming R-680 Series.

               FAA-PMA approved


Part #:   RG-690-D-18

SET OF  18 GASKETS.  

Gaskets are 1/16" thick silicone.

Reusable.


INSTALLATION INSTRUCTIONS:

Follow instructions on the label.

Gasket surfaces must be clean and dry.  

Remove all traces of oil.

TORQUE: 15 TO 20 INCH POUNDS.


CAUTION - DO NOT OVER-TIGHTEN!

Over tightening causes the gasket to bulge out or squeeze out.


TO REUSE GASKET: 

Wash gasket briefly in hot water and soap. 

Rinse the gaskets thoroughly and dry all surfaces. 

Re-install using the above installation instructions.


Proudly made in the USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

USE CORK? GET REAL!   REAL Gaskets that is…


REAL Gaskets Tennessee is a manufacturer of silicone rubber gaskets 

for aircraft, automobile, and motorcycle engines.


Our silicone rubber gaskets are made from aerospace mechanical 

grade AMS silicone, designed to withstand temperatures up 

to 400 degrees Fahrenheit and to last the life of the engine.


Our gaskets seal uneven surfaces, eliminate corrosion and 

are 100% reusable.


We manufacture valve cover gaskets for:


Aircraft: Continental, Franklin, Lycoming, Pratt & Whitney and 

Wright radial piston aircraft engines.


Automobiles: Ford, GM, Mopar, Porsche and VW automobile 

engines.


Motorcycles:  BMW, Harley-Davidson, Suzuki, BSA, Ducati, 

Moto Guzzi, Norton, Triumph, Saab and most other 

motorcycle engines. 


If you are tired of oil leaks, then a silicone rubber gasket is the 

only way to go, and REAL Gaskets Tennessee is the only 

place you can get “The Original” silicone rubber gasket.


MADE IN THE USA.



LYCOMING Pushrod Tube Gaskets for R-680 SERIES  (Set of 18 gaskets ) RG-690-D-18 LYCOMING Pushrod Tube Gaskets for R-680 SERIES  (Set of 18 gaskets ) RG-690-D-18 LYCOMING Pushrod Tube Gaskets for R-680 SERIES  (Set of 18 gaskets ) RG-690-D-18


Click here to purchase or contact the seller of this item on eBay