VALVE COVER GASKETS - SILICONE 

for

CONTINENTAL  -  W-670 SERIES  

   -   Our silicone rubber gaskets are made from aerospace mechanical 

        grade AMS silicone and designed to withstand temperatures 

        up to 400 degrees Fahrenheit.   

   -   Therefore, they will not break down and deform or crack up 

        like cork or neoprene.   

   -   Our gaskets seal uneven and warped surfaces, and

        eliminate corrosion.

   -   Gaskets are 100% reusable.

FITS:        W-670 Series   

                FAA-PMA approved

PART #:   RG-20254-14

OEM # 20254

THIS IS A SET OF 14 SILICONE GASKETS  

Gaskets have six bolt holes and are 1/16" thick

Reusable.

INSTALLATION INSTRUCTIONS:

Wash the cover and mounting surfaces with solvent.   

Remove all traces of oil.

Gaskets surfaces most be clean and dry.

Silicone gaskets are installed DRY (No oil or lube used of any type).      

TORQUE: 15  INCH POUNDS.      

CAUTION - DO NOT OVER-TIGHTEN!

Over tightening causes the gaskets to bulge out or squeeze out.

If that happens then back off on the torque.

TO REUSE GASKET: 

Wash gasket briefly in hot soapy water.

Rinse well and dry thoroughly.   

Re-install gasket using the above installation instructions.

Save instructions for future reference.

PROUDLY MADE IN USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

USE CORK?     GET REAL!     REAL Gaskets that is…

REAL Gaskets Tennessee is a manufacturer of silicone rubber gaskets 

for aircraft, automobile, and motorcycle engines.

Our silicone rubber gaskets are made from aerospace mechanical 

grade AMS silicone, designed to withstand temperatures 

up to 400 degrees Fahrenheit and to last the life of the engine.

Our gaskets seal uneven surfaces, eliminate corrosion and 

are 100% reusable.

We manufacture valve cover gaskets for:

Aircraft: Continental, Franklin, Lycoming, Pratt & Whitney and 

Wright radial piston aircraft engines.

Automobiles: Chevrolet, Ford, GM, Mopar, Porsche and VW 

automobile engines. 

Featuring NEW *ULTIMATE* GASKETS that are 

fiberglass reinforced silicone.    

Check them out!

Motorcycles:  BMW, Harley-Davidson, Suzuki, BSA, Ducati, 

Moto Guzzi, Norton, Triumph, Saab and most other 

motorcycle engines.

If you are tired of oil leaks, then a silicone rubber gasket is 

the only way to go, and REAL Gaskets Tennessee is the 

only place you can get “The Original” silicone 

rubber gasket.

MADE IN THE USA.